As an Amazon Associate I earn from qualifying purchases.
MRbrew #ad - It has a tremendously low restriction, which makes it ideal for working with a pump to do gravity transferring. No leaks & rust-freethis wort chiller's plates and fittings are made of 304 stainless steel and have been brazed together with pure copper in an oxygen-free furnace, there is no potential for leaks and rust, can withstand -321F to 392F.
Chills wort in minutes!mrbrew 30-plate wort chiller cools wort faster than the immersion chiller by increasing surface area covered by cold water and running wort between plate and plate meanwhile. Working with a pump will increase flow rates through the chiller, trusted product quality, allow for more mounting options and add the ultimate flexibility during the brew day! 100% lifelong issues solving for youeach mrbrew 30 plates wort chiller is backed by unbeatable, reliable, we will unconditionally solve your problems if you are not satisfied!.
Do remember to clean the inlets and outlets to remove metal debris before use! Great upgradethe chiller connection ports are all 1/2" male npt quick disconnect fittings. Gone for you are the days of an immension chiller that takes hours! highly save your walletthis super-efficient chiller uses less water than any other chiller on the market, the wort is flowing through the chambers inside the plate chiller and aerates for your pitching yeast, you will save water and and cost of buying an aeration stone and CO2 canisters, it is especially great for brewers in southern climates!.
Coldbreak #ad - 9" x 4. 25" 18" coil diameter x coil height x inlet height. Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process.
A 30' wort chiller is the perfect size if you are making full boil extract kits or making smaller all grain batches 3-6 gallons.
Coldbreak #ad - Made in the usa michigan from pure 3/8” copper tubing. The inlet has a standard heavy duty female garden hose fitting, also made in the USA. Perfect for the kitchen homebrewer that is making extract batches.
The compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter not included. Vinyl tubing comes assembled with 2 4’ lengths, or 8 feet total.
HFS #ad - 321f to 392f temperature range - Max PSI 145. Per fda regulation - 4-101. 14 - copper is completely safe to use in brewing equipment.
Ferroday #ad - After done, dry the chiller before storage. Easy to clean out: the heat exchanger can't be dissembled to clean. Cannot be used for viscous liquids. Using this plate chiller can reduce oxidation in your homebrew heat exchange. Compared with the immersion chiller, our heat exchanger has 20 brazed plates and cools wort within minutes rather than several hours.
One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Please install a filter for the wort to prevent clogging of the wort chiller.
Durable material: this wort chiller is made of 304 stainless steel plates with 99. 9% copper brazed. Quickly chilling beer wort: this compact heat exchanger is designed for chilling your beer/ wort/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Then running some clear water through the wort chiller. Using another hose to connect the water-out port of the chiller to remove the warm water.
Ferroday #ad - Durable material: this wort chiller is made of 304 stainless steel plates with 99. 9% copper brazed. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using this plate chiller can reduce oxidation in your homebrew heat exchange.
After done, dry the chiller before storage. So firstly you can run 5 gallons of cleaning solution through this chiller. Using another hose to connect the water-out port of the chiller to remove the warm water. Then running some clear water through the wort chiller.
Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the wort to prevent clogging of the wort chiller. Easy to clean out: the heat exchanger can't be dissembled to clean. Quickly chilling beer wort: this compact heat exchanger is designed for chilling your beer/ wort/water.
YUEWO #ad - Dimension - 3. 94inch x 7. 87inch x 13. 78inch/10cm x 20cm x 25cmcoil diameter x coil height x inlet height copper immersion wort chiller, 2 pcs 1. 5m/4. 92feet vinyl tubing. High efficient & easy to clean - this immersion wort chiller used for cooling beer or malt.
Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source.
It has reliable performance and quick wort cooling process. High performance & quick cooling - the home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. Our wort chillers are up to the task whether it's winter or summer.
BACOENG #ad - 10' of food grade tubing33-220℉ allows you to chill your wort directly & safely from the stove. With 2x the ss tubing of our standard chiller, this unit provides faster cooling for larger batches.
Ferroday #ad - Our female quick disconnect is anti-corrosion/ heat-resistant and wear-resistant. Connection easilythis quick disconnect set allows one hand operation of take on/ take off. No leaksthe barbed quick disconnect has a red silicone gasket inside.
Push-on hose fittings firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick disconnect, and then release the collar to lock.
304 stainless steel the fpt quick disconnect is made of top quality 304SS that will last a lifetime. Quickly switch lines between equipment 1/2 npt thread quick disconnect can attach to any 1/2 male thread fitting（ball valve, wort chillers, beer pump. It will create a tight seal for liquid & gas between FPT fitting and the barbed quick disconnect. All parts fit together very well.
1. MRbrew
#ad1/2 NPT Thread Connection Hot Liquid Accelerated Cooler, Stainless Steel and Brazed with Copper Heat Exchanger, 30 PlatesMRbrew Homebrew Wort Chiller
#adChills wort in minutes!mrbrew 30-plate wort chiller cools wort faster than the immersion chiller by increasing surface area covered by cold water and running wort between plate and plate meanwhile. Working with a pump will increase flow rates through the chiller, trusted product quality, allow for more mounting options and add the ultimate flexibility during the brew day! 100% lifelong issues solving for youeach mrbrew 30 plates wort chiller is backed by unbeatable, reliable, we will unconditionally solve your problems if you are not satisfied!.
More information #ad
Do remember to clean the inlets and outlets to remove metal debris before use! Great upgradethe chiller connection ports are all 1/2" male npt quick disconnect fittings. Gone for you are the days of an immension chiller that takes hours! highly save your walletthis super-efficient chiller uses less water than any other chiller on the market, the wort is flowing through the chambers inside the plate chiller and aerates for your pitching yeast, you will save water and and cost of buying an aeration stone and CO2 canisters, it is especially great for brewers in southern climates!.
| Brand | MRbrew #ad |
More information #ad
2. Coldbreak
#adColdbreak Homebrew 3-5 Gallon Batch Copper Immersion Wort Chiller, Medium, Tubing and Garden Hose Fitting, USA Made, Leak Free Compression Barbs, 3/8” x 30' Pure Copper
#adA 30' wort chiller is the perfect size if you are making full boil extract kits or making smaller all grain batches 3-6 gallons.
More information #ad
It can easily connect to your kitchen sink with a sink adapter not included. The inlet has a standard heavy duty female garden hose fitting, also made in the USA. Vinyl tubing comes assembled with 2 4’ lengths, or 8 feet total. Made in the usa michigan from pure 3/8” copper tubing.| Brand | Coldbreak #ad |
| Manufacturer | Coldbreak Brewing Equipment #ad |
| Height | 18 Inches |
| Length | 9 Inches |
| Width | 13 Inches |
| Part Number | CB630 |
| Model | CB6 |
More information #ad
3. Coldbreak
#adUSA Made, Leak Free Compression Barbs, 3/8" x 15' Pure Copper, Vinyl Tubing and Garden Hose Fitting Included, Coldbreak Homebrew 1-3 Gallon Batch Copper Immersion Wort Chiller
#adThe compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter not included. Vinyl tubing comes assembled with 2 4’ lengths, or 8 feet total.
More information #ad
Typically, with extract batches you boil a smaller amount of concentrated wort 1-3 gallons and then add clean cool water before adding the yeast. Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process. 6. 75" x 3" x 14" coil diameter x coil height x inlet height.| Brand | Coldbreak #ad |
| Manufacturer | Coldbreak Brewing Equipment #ad |
| Height | 14 Inches |
| Length | 7 Inches |
| Width | 9 Inches |
| Part Number | CB615 |
| Model | CB6 |
More information #ad
4. HFS
#ad3/4" x 1/2" NPT, HFSR Homebrew Beer Wort Chiller 7.5'' 2.9''/30 plate
#adMore information #ad
Cools 10 gallon batches from 212F to 75F in 10 minutes. 304 stainless with 99. 9% copper Brazing. 2. 9"w x 7. 5"l x 30 plates 3. 5"h - 1/2"npt wort fitting x 3/4" NPT Water Fitting.| Brand | HFS #ad |
| Manufacturer | HFS #ad |
| Weight | 3.02 Pounds |
| Part Number | BREW-PL-CHILL |
| Model | BREW-PL-CHILL |
More information #ad
5. Ferroday
#adFerroday 20 Plate Wort Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 NPT Thread Plate Chiller 7.5" x 1.97"
#adOne side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Please install a filter for the wort to prevent clogging of the wort chiller.
More information #ad
Multifunctional usage: using for cooling wort/beer/water. Can work with water pump: the wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. Durable material: this wort chiller is made of 304 stainless steel plates with 99. 9% copper brazed. Quickly chilling beer wort: this compact heat exchanger is designed for chilling your beer/ wort/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Then running some clear water through the wort chiller. Using another hose to connect the water-out port of the chiller to remove the warm water.
| Brand | Ferroday #ad |
| Manufacturer | FERRODAY #ad |
| Height | 50 Centimeters |
| Length | 100 Centimeters |
| Width | 100 Centimeters |
| Part Number | WC-M-508 |
More information #ad
6. Ferroday
#adFERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller, 7.3" x 2.8"
#adAfter done, dry the chiller before storage. So firstly you can run 5 gallons of cleaning solution through this chiller. Using another hose to connect the water-out port of the chiller to remove the warm water. Then running some clear water through the wort chiller.
More information #ad
Cannot be used for viscous liquids. Multifunctional usage: using for cooling wort/beer/water. Can work with water pump: the wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the wort to prevent clogging of the wort chiller. Easy to clean out: the heat exchanger can't be dissembled to clean. Quickly chilling beer wort: this compact heat exchanger is designed for chilling your beer/ wort/water.
| Brand | Ferroday #ad |
| Manufacturer | FERRODAY #ad |
| Part Number | WC-S-612B |
More information #ad
7. YUEWO
#adGarden Hose Fitting, YUEWO 26 ft Copper Immersion Wort Chiller Coil Homebrew for Beer Brewing with Vinyl Tubing
#adPackage includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source.
More information #ad
Package list - package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps. The beer wort chiller transfers heat more efficiently and is easy to clean. It has reliable performance and quick wort cooling process. High performance & quick cooling - the home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. Our wort chillers are up to the task whether it's winter or summer.
| Brand | YUEWO #ad |
| Manufacturer | YUEWO #ad |
| Part Number | WortChiller-BM |
More information #ad
8. BACOENG
#adBACOENG Food Grade Super Efficient 5/16" x 50' Stainless Steel Wort Chiller
#adMore information #ad
Coils can be elevated to increase the efficiency of the cooling process. Ss clamps solidify the structure, and allow for adjustability in the coil spacing. Made from 1mm wall stainless tubing to provide better heat transfer.| Brand | BACOENG #ad |
More information #ad
9. Ferroday
#adFERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2" Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings
#adPush-on hose fittings firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick disconnect, and then release the collar to lock.
More information #ad
The internal o-ring is food grade silicone. The fpt quick disconnect works perfect for homebrew quick disconnect setup. The 1/2" od barbed hose fittings is great for attaching 1/2" ID hose. 304 stainless steel the fpt quick disconnect is made of top quality 304SS that will last a lifetime. Quickly switch lines between equipment 1/2 npt thread quick disconnect can attach to any 1/2 male thread fitting（ball valve, wort chillers, beer pump. It will create a tight seal for liquid & gas between FPT fitting and the barbed quick disconnect. All parts fit together very well.
| Brand | Ferroday #ad |
| Manufacturer | FERRODAY #ad |
| Part Number | 1/2 Female Thread, 1/2" Barbed Fitting |
More information #ad
10. NY Brew Supply
#adNY Brew Supply Homebrew Immersion Wort Chiller-25 Tubing, Copper, 25'
#adNY Brew Supply #ad - Vinyl outlet hose: 5' Long. Copper coil diameter: 3/8". Drops your worth temperature quickly. Made in USA. Overall length: 25'. Made of copper.More information #ad
| Brand | NY Brew Supply #ad |
| Manufacturer | NY Brew Supply #ad |
| Height | 13 Inches |
| Length | 9.25 Inches |
| Width | 9.25 Inches |
| Part Number | W3825-CV |
| Model | W3825-CV |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
